-
-7%
LCD Multifunction Voltage Tester
The Extech VT30 is a voltage, continuity and phase tester, featuring a built-in flashlight and backlit digital display with bar graph. This rugged tester is protected by a double molded IP64 housing and offers polarity detection with LEDs for positive and negative DC as well as a CAT III 600 Volt / CATIV 600 Volt safety rating. The VT30 comes complete with a one year warranty, 2 AAA batteries, protective cap, and pouch case.
Extech VT30
Original price was: ₦134,000.00.₦124,000.00Current price is: ₦124,000.00. -
-2%
Vibration Meter
The VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases. VB450 features a wide 10Hz to 1500Hz frequency range and provides Displacement, Velocity, and Acceleration measurement. Complete with remote sensor, magnetic mount, 9V battery, wrist strap, and soft case.
Extech VB450 – NIST
Original price was: ₦1,197,000.00.₦1,178,000.00Current price is: ₦1,178,000.00. -
-3%
Vibration Meter
The VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases. VB450 features a wide 10Hz to 1500Hz frequency range and provides Displacement, Velocity, and Acceleration measurement. Complete with remote sensor, magnetic mount, 9V battery, wrist strap, and soft case.
Extech VB450
Original price was: ₦857,000.00.₦831,000.00Current price is: ₦831,000.00. -
-4%
Pen Vibration Meter
The Extech VB400 Pen Vibration Meter is designed to provide easy and accurate velocity and acceleration measurements on industrial machinery. Its measures RMS Acceleration and Velocity with metric and imperial units of measure. The VB400 has a wide frequency range from 10 Hz to 1 kHz and basic accuracy of ± (5% + 2 digits). Additional features include zero adjustment, data hold, and a low battery indicator. Water and dust resistant to IP65. Complete with test pin tip, magnetic base, 4 AAA batteries, and pouch case.
Extech VB400
Original price was: ₦837,000.00.₦804,000.00Current price is: ₦804,000.00. -
High Resolution Micro-Ohm Meter
The Extech UM200 is a precision Micro-Ohm Meter which features a resolution down to 1 µΩ. The UM200 has 6 ranges with 3 sub-ranges in each current range. It features a 5-Digit backlit LCD, PC interface, auto or manual ranging, and a 10 A maximum test current. Store/Recall up to 3000 measurements. Complete with 4-wire cables with Kelvin clip connectors, rechargeable Li-Polymer battery, AC adapter/charger, software and USB cable, and soft carrying case.
Extech UM200 – NIST
Original price was: ₦3,525,000.00.₦3,520,000.00Current price is: ₦3,520,000.00. -
High Resolution Micro-Ohm Meter
The Extech UM200 is a precision Micro-Ohm Meter which features a resolution down to 1 µΩ. The UM200 has 6 ranges with 3 sub-ranges in each current range. It features a 5-Digit backlit LCD, PC interface, auto or manual ranging, and a 10 A maximum test current. Store/Recall up to 3000 measurements. Complete with 4-wire cables with Kelvin clip connectors, rechargeable Li-Polymer battery, AC adapter/charger, software and USB cable, and soft carrying case.
Extech UM200
Original price was: ₦3,000,000.00.₦2,999,000.00Current price is: ₦2,999,000.00. -
-3%
Digital Ultrasonic Thickness Gauge/Datalogger
The Extech TKG150 is a Digital Ultrasonic Thickness Gauge/Data logger. The compact, rugged meter allows for non-destructive thickness measurements. It offers thickness gauges designed in compact, handheld, rugged housing which is ideal for field use. The ultrasonic technology allows for non-destructive thickness measurements for primarily steel structures. Complete with protective holster, 2 oz bottle of coolant, 2 AA batteries, 5 MHz transducer, hard carrying case, USB cable, and exporter software.
Extech TKG150
Original price was: ₦5,000,000.00.₦4,828,000.00Current price is: ₦4,828,000.00. -
-3%
Vibration Meter/Datalogger
The SDL800 – NIST measures and datalogs vibration using a remote vibration sensor with magnetic adapter on 47.2″(1.2m) cable. It offers a wide frequency range of 10Hz to 1kHz with basic accuracy of ±(5% + 2 digits). Manually store 99 readings or continuously datalog using a SD memory card, which allows user to easily transfer collected data to a PC for further analysis as an Excel format. Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case.
Extech SDL800 – NIST
Original price was: ₦1,975,000.00.₦1,914,500.00Current price is: ₦1,914,500.00. -
-5%
Vibration Meter/Datalogger
The SDL800 measures and datalogs vibration using a remote vibration sensor with magnetic adapter on 47.2″(1.2m) cable. It offers a wide frequency range of 10Hz to 1kHz with basic accuracy of ±(5% + 2 digits). Manually store 99 readings or continuously datalog using a SD memory card, which allows user to easily transfer collected data to a PC for further analysis as an Excel format. Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case.
Extech SDL800
Original price was: ₦1,600,000.00.₦1,525,000.00Current price is: ₦1,525,000.00. -
-4%
3000A Datalogging Power Analyzer Kit
The Extech PQ3450-30 is a 3-phase power analyzer/data logger capable of logging up to 30,000 sets of measurements in Excel® format on a removable SD memory card. It includes a large dot-matrix, built-in clock and calendar, and a backlit LCD with easy-to-use onscreen menu. It allows for full system analysis with up to 35 parameters. The adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio allows for high power distribution systems. Log up to 30,000 reading on a removable SD memory card in Excel® format. Wide sampling rate range (2 seconds to 2 hours). Complete with 4 voltage leads with alligator clips, three 3000 A current clamps, 8 AA batteries, SD card, 100-240 V AC adapter, and case.
Extech PQ3450-30
Original price was: ₦5,100,000.00.₦4,908,000.00Current price is: ₦4,908,000.00. -
-17%
3-Phase Power Analyzer/Datalogger
The Extech PQ3450 is a 3-phase power analyzer/data logger capable of logging up to 30,000 sets of measurements in Excel® format on a removable SD memory card. The product is easy-to-hold with a rugged over molded housing. It features a built-in clock and calendar, 35 parameters, and a CAT III 600V safety rating. Complete with a year warranty, 4 voltage leads with alligator clips, 8 AA batteries, SD card, 100-240 Volt AC adaptor and case. Clamp probes sold separately.
Extech PQ3450
Original price was: ₦4,521,000.00.₦3,757,000.00Current price is: ₦3,757,000.00. -
-8%
200A Current Clamp Probes
The Extech PQ34-2 is a set of 200 Amp Current Clamp Probes. Use with the PQ3450 and PQ3470 analyzers. Featuring a 19 mm (0.8 in) jaw size, this product comes with three current clamp probes and a year warranty.
Extech PQ34-2
Original price was: ₦905,000.00.₦836,200.00Current price is: ₦836,200.00. -
-23%
Voltage Test Leads
The Extech PQ1000 is a CAT IV Test Lead accessory kit For PQ3400 series power analyzers. It includes a set of 4, 3 m (10 ft) test leads (black, red, blue, yellow) with shrouded banana plugs on both ends (right angle on one end). Includes test probes, alligator clips, and long reach spring loaded clips.
Extech PQ1000
Original price was: ₦345,600.00.₦265,000.00Current price is: ₦265,000.00. -
-13%
1-/3-Phase 1000A True RMS AC Power Clamp Meter
The PQ2071 is a 1-/3-Phase 1000 Amp True RMS AC Power Clamp Meter. Extech’s multifunctional PQ2071 Power Clamp meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector. Featuring a CAT IV-600 Volt safety rating, the PQ2071 measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power. Measures 1-Phase and balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh), plus Power Factor and Phase Angle. Featuring a 2.16 in. (55 mm) clamp jaw opening. Large dual backlit LCD display (9999 count) with bargraph. Frequency measurements to 200Hz. manually store/recall up to 99 data sets. Data Hold, Max/Min, and Auto power off functions. USB interface for connection to a PC for data logging function with included software. Complete with test leads, four color-coded leads and alligator clips, USB cable, PC software, 9V battery and soft case.
Extech PQ2071
Original price was: ₦425,600.00.₦370,000.00Current price is: ₦370,000.00. -
-36%
Digital Mini MultiMeter
The Extech MN36 digital multimeter is compact but still packed with features. Capable of measuring AC and DC voltage up to 600 volts, the MN36 is autoranging, which means it automatically displays readings with the proper decimal place location and maximum resolution. Comes with protective rubber holster, 2xAAA batteries, bead wire Type K temp. probe and test leads.
Extech MN36
Original price was: ₦98,400.00.₦63,200.00Current price is: ₦63,200.00. -
-20%
Wireless Datalogging CAT IV True RMS Multimeter
Extech’s MM750W – NIST is a fully loaded, rugged, Wireless Datalogging Multimeter with 14 functions. It includes non-contact AC voltage detection and Type-K temperature measurement. Using the wireless feature, Bluetooth® data logging module, and the free ExView® W-Series App, you can transmit readings in real-time to your smart devices, store over 15K readings for wireless transfer to generate a report/data analysis, add notes and readings to photos taken from your smart device camera, and use your smart device as a 2nd display for easy viewing or sharing. A smart meter that does not require a clipboard or notepad on the job.
Extech MM750W – NIST
Original price was: ₦518,700.00.₦416,000.00Current price is: ₦416,000.00. -
-11%
Wireless Datalogging CAT IV True RMS Multimeter
Extech’s MM750W is a fully loaded, rugged, Wireless Datalogging Multimeter with 14 functions. It includes non-contact AC voltage detection and Type-K temperature measurement. Using the wireless feature, Bluetooth® data logging module, and the free ExView® W-Series App, you can transmit readings in real-time to your smart devices, store over 15K readings for wireless transfer to generate a report/data analysis, add notes and readings to photos taken from your smart device camera, and use your smart device as a 2nd display for easy viewing or sharing. A smart meter that does not require a clipboard or notepad on the job.
Extech MM750W
Original price was: ₦205,400.00.₦183,000.00Current price is: ₦183,000.00. -
-11%
The MA1500 – NIST is a 1500A True RMS AC/DC Clamp Meter. 2.0 in. (52mm) jaw size for conductors up to 500MCM with True RMS for accurate readings of non-sinusoidal waveforms. Additional features include: Relative Mode for Capacitance Zero and Offset Adjustment, Data Hold, Peak Hold, MIN/MAX, Auto Power Off, and Inrush function to capture transients during motor startup. Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case.
Extech MA1500 – NIST
Original price was: ₦675,600.00.₦600,000.00Current price is: ₦600,000.00. -
-9%
The MA1500 is a 1500A True RMS AC/DC Clamp Meter. 2.0 in. (52mm) jaw size for conductors up to 500MCM with True RMS for accurate readings of non-sinusoidal waveforms. Additional features include: Relative Mode for Capacitance Zero and Offset Adjustment, Data Hold, Peak Hold, MIN/MAX, Auto Power Off, and Inrush function to capture transients during motor startup. Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case.
Extech MA1500
Original price was: ₦395,400.00.₦360,000.00Current price is: ₦360,000.00. -
-23%
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 – NIST Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Extech MA445 – NIST
Original price was: ₦403,000.00.₦308,700.00Current price is: ₦308,700.00. -
-30%
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Extech MA445
Original price was: ₦207,200.00.₦145,900.00Current price is: ₦145,900.00. -
-15%
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 – NIST Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Extech MA443-NIST
Original price was: ₦302,600.00.₦257,300.00Current price is: ₦257,300.00. -
-29%
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Extech MA443
Original price was: ₦153,500.00.₦109,400.00Current price is: ₦109,400.00. -
-8%
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Extech MA440 – NIST
Original price was: ₦205,000.00.₦189,000.00Current price is: ₦189,000.00. -
-14%
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Extech MA440
Original price was: ₦98,400.00.₦85,000.00Current price is: ₦85,000.00. -
-11%
The MA63-NIST is an AC/DC current clamp with NCV voltage detector and full overload protection. Manual ranging clamp meter with three Current ranges and AC/DC voltage to 600V. The 6000mA range allows for low current measurements that may be used in the automotive industry. Unique VFC (variable frequency control) mode helps troubleshoot and diagnose HVAC applications that are variable frequency driven. The MA63-NIST also features resistance, capacitance, frequency, diode and continuity measurements as well as data hold low battery indicator, and auto power off functions. Complete with test leads, carrying case, and two AAA batteries.
Extech MA63 – NIST
Original price was: ₦670,500.00.₦599,000.00Current price is: ₦599,000.00. -
-18%
The MA63 is an AC/DC current clamp with NCV voltage detector and full overload protection. Manual ranging clamp meter with three Current ranges and AC/DC voltage to 600V. The 6000mA range allows for low current measurements that may be used in the automotive industry. Unique VFC (variable frequency control) mode helps troubleshoot and diagnose HVAC applications that are variable frequency driven. The MA63 also features resistance, capacitance, frequency, diode and continuity measurements as well as data hold low battery indicator, and auto power off functions. Complete with test leads, carrying case, and two AAA batteries.
Extech MA63
Original price was: ₦395,400.00.₦325,900.00Current price is: ₦325,900.00. -
-15%
The HDV540 is a light-weight VideoScope Kit that includes a wired handset and 6 mm diameter camera. Easy, one-hand operation of the articulating camera tip facilitates viewing in obstructed areas where standard camera tips cannot access. Images and videos are viewed on the high resolution color display or external monitors, and they can be stored in SD memory card (included) or a USB flash drive. Featuring a glare free close up field of view, AV output for viewing images/video on a monitor, record voice-over audio in video recording mode, and memory storage of 20,000 images. Complete with 3.7 V rechargeable Li-Polymer battery, 100 V/240 V Universal AC adaptor and multiple plug types (US, EU, UK, AUS), USB and AV cables, and a hard carrying case.
Extech HDV540
Original price was: ₦1,950,000.00.₦1,649,000.00Current price is: ₦1,649,000.00. -
-18%
The Extech HDV5-6CAM-1AFM is an optional camera head for use with the HDV500 Videoscope series. This 6 mm Camera Head with a macro lens, features a 60° field of view. One meter semi-rigid cable length. Minimum focus distance at 2 cm (0.79 in).
Extech HDV5-6CAM-1AFM
Original price was: ₦1,350,000.00.₦1,105,000.00Current price is: ₦1,105,000.00. -
-4%
The Extech HDV-5CAM-30FM is an optional camera for use with the HDV600 videoscope series. This 5.5 mm camera head with macro lens features a 65° field of view (FOV). Thirty meter semi-rigid cable length. Minimum focus distance at 15 mm (0.59 in).
Extech HDV-5CAM-30FM
Original price was: ₦4,500,000.00.₦4,308,000.00Current price is: ₦4,308,000.00. -
-7%
The Extech HDV-5CAM-10F is an optional camera for use with the HDV600 videoscope series. This 5.5 mm Camera Head with a long depth of field lens features a 65° field of view. Ten meter semi-rigid cable length. Minimum focus distance at 15 mm (0.59 in).
Extech HDV-5CAM-10F
Original price was: ₦1,980,000.00.₦1,843,500.00Current price is: ₦1,843,500.00. -
-9%
The Extech HDV-5CAM-1FM is an optional camera for use with the HDV600 VideoScope series. This 5.5 mm camera head with a Macro lens features a 65° field of view. Includes one meter semi-rigid cable length. Minimum focus distance at 15 mm (0.59 in).
Extech HDV-5CAM-1FM
Original price was: ₦759,400.00.₦690,000.00Current price is: ₦690,000.00.